I have a fuel leak at the fuel injector and would like to replace the o-ring before replacing the injectorHow do i change injector o-ring on a 92 ford explorer?
pull the injector out and change itHow do i change injector o-ring on a 92 ford explorer?
You have to unbolt the fuel rail (the chrome tude running over the injectors) from the intake, it should only be two small bolts per side. Then lift it, it will seem stuck, you have to pull hard but it will come up and free the injectors. Then just remove the bad injector which will either be stuck to the rail or the intake manifold. So you will have to pull hard and wiggle it until it comes out. Then replace the o-ring and put it all back together again. Now what you have to do just to get to the injector rail and have enough clearance to pull it out of the way. Depends on how much stuff is over and around it, you might have to remove or loosen a bunch of other things. But that fuel rail is the only thing holding the injectors in place. Good Luck!!!